Trapac® Walkway allows work to be carried out more safely on the roof. Available in 4 colours to blend in with the roof, they suit concrete, clay, slate or fibre cement roof. Lengths can also be joined to make longer walkways.
Installation
Walkway should not exceed edge of Support Bracket by more than 10cm. To fit Walkway to Support Bracket two fixings per Support are required. The Support Brackets allow for 3 degrees of horizontal adjustment.
Profiled Tiles with load-bearing battens: Support Bracket is hung onto load-bearing batten. Additional battens are not required. With large format clay tiles an additional batten may be necessary if the distance between the battens is greater than 37cm.
Flat Tiles: For fl at tiles an additional batten is required so that the Support Bracket can be secured through three holes in the metal strip. Maximum distance between Support Brackets is 90cm.
Material
Walkway: Galvanised steel DX52 D+AZ 150 NA-C, powder coated
Connectors & Support Brackets: Galvanised steel DX51D/S235 JRG2 to EN1461
Fixings for Walkway to Support Bracket: Galvanised steel
Colours
Black
Dark brown
Galvanised
Terracotta
Download file |
|
Installation sheet |